Appropriate for military, civil and maritime communication use; either on control centers or coastal stations.

CL 525 A CA 525 A - Accesories
  • CL 525 A CA 525 A2 - Accesories
  • CL 525 A CA 525 A3 - Accesories

RF SWITCH

CL-525-A/CA-525-A

Fabricated in two diffrent modules.
Selectable local or remote operation.
Remote operation through serial port.

  • Selectable local or remote operation.
  • Remote operation through RS-232-C port.
  • Frontal indicators of the communication state.
  • Designed for operating in intense radiofrequency fields.
  • Conmutation of 12 x 13.
  • Maximum conmuted power 1250 W.
  • Operating frequency from 0.1 to 30 MHz.
  • Power supply 220Vac ±20%, 50 Hz.
  • Operation temperature range -10°C to +60°C.
  • Relative Humidity 90%
  • Control model CL-525-A.
  • Conmuter model CA-525-A.

Downloads available:

RF Switch CL-525-A (English)
Conmutacion RF CL-525-A (Español)

ANTENNAS’ CONTROL AND SWITCHBOARD

Ref.: CA-500-A/B

Built in two different modules.

Selectable local or remote operation.

Remote operation through serial port.

  • Selectable local or remote operation.
  • Remote operation through RS-232-C port.
  • Frontal indicators of the commutation state.
  • Designed for operating in intense radiofrequency fields.
  • Switch of 6 x 13, bidirectionally.
  • Maximum commuted power 1250W by input.
  • Operating frequency from 0.1 to 30Mhz.
  • Power supply 220Vac ±20%, 50Hz.
  • Operation temperature range -10°C to +60°C.
  • Relative humidity 90%.
  • Control model CA-500-A.
  • Switch model CA-500-B.

Downloads available:

Antennas’ Control CA-500-A/B (English)
Antennas’ Control CA-500-A/B (Español)
Antennas’ Control CA-500-A/B (Français)

CA 500 A B - Accesories
  • CA 500 A B2 - Accesories
CA 800 A - Accesories

RX ANTENNAS SWITCH

Ref.: CA-800-A

8 anntenas switching to 8 receivers for RF signals from 0 to 30MHz.

Remote operation by means of serial port.

This equipment allows to assign antenna (8 antennas), to one or several receivers simultaneously (8 receivers)

  • Remote operation by means of RS-232-C port.
  • Switching state frontal indicators.
  • Designed for operating in intense radiofrequency fields.
  • Switching to 8 antennas to 8 receivers.
  • Operation frequency from 0 to 30 MHz.
  • Power supply 220Vac ±10%, 50Hz.
  • Operation temperature range -30°C to +85°C.
  • Maximum signal level +40dB.
  • Impedance 50 Ohms.
  • Memorazing of the last state. In case of failure, it retrieves the state it which it got disconnected.

Downloads available:

Switch CA-800-A (English)
Conmutador CA-800-A (Español)
Commutateur CA-800-A (Français)

Selcal Encoder 16/32 (SC-600-A)

Ref.: SC-600-A

The SC-600-A SELCAL Encoder conforms to the requirements of ANRIC 714-6 “MARK—3 AIRBONE SELCAL SYSTEM”, Part III, Ground Selective Calling Unit.

The SC-600-A is housed in a self-contained 19” unit, that includes a keyboard and a display.

  • Ergonomic design.
  • Easy to operate.
  • Highly visible LCD display.
  • Code input through frontal keyboard.
  • Computer interface through RS-232-C connector.
  • Auxiliary relay for PTT and audio switching.
  • Optional SELCAL 32.
  • Earth/air selective call all in one unit.

Downloads available:

SELCAL ENCODER SC-600-A (English)
SECAL PROCESADOR DE AUDIO SC-600-A (Español)
SECAL PROCESSEUR D’AUDIO SC-600-A (Français)

SC600A 300x170 - Accesories
Selcal32 - Accesories

Related products:

PRODUCT REQUEST

Please contact us if you have a request or some questions about product, service, support etc.
Contact Sales
Service Desk